 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number : ENA0301 ECH8615 SANYO Semiconductors DATA SHEET P-Channel Silicon MOSFET ECH8615 Features * * General-Purpose Switching Device Applications 4V drive. Composite type, facilitating high-density mounting. Specifications Absolute Maximum Ratings at Ta=25C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (Pulse) Allowable Power Dissipation Total Power Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD PT Tch Tstg PW10s, duty cycle1% Mounted on a ceramic board (900mm2!0.8mm) 1unit Mounted on a ceramic board (900mm2!0.8mm) Conditions Ratings --60 20 --2 --20 1.3 1.5 150 --55 to +150 Unit V V A A W W C C Electrical Characteristics at Ta=25C Parameter Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Symbol V(BR)DSS IDSS IGSS VGS(off) yfs RDS(on)1 RDS(on)2 Ciss Coss Crss td(on) tr td(off) tf Conditions ID=--1mA, VGS=0V VDS=-60V, VGS=0V VGS=16V, VDS=0V VDS=-10V, ID=--1mA VDS=-10V, ID=--1A ID=--1A, VGS=-10V ID=--0.5A, VGS=-4V VDS=-20V, f=1MHz VDS=-20V, f=1MHz VDS=-20V, f=1MHz See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. Ratings min --60 --1 10 --1.2 2.1 3.5 160 210 660 54 42 10.5 7.0 93 30 210 295 --2.6 typ max Unit V A A V S m m pF pF pF ns ns ns ns Marking : FH Continued on next page. Any and all SANYO Semiconductor products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO Semiconductor representative nearest you before usingany SANYO Semiconductor products described or contained herein in such applications. SANYO Semiconductor assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor products described or contained herein. TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 80906 / 12506PE MS IM TB-00001931 No. A0301-1/4 ECH8615 Continued from preceding page. Parameter Total Gate Charge Gate-to-Source Charge Gate-to-Drain "Miller" Charge Diode Forward Voltage Symbol Qg Qgs Qgd VSD Conditions VDS=--30V, VGS=--10V, ID=-2A VDS=--30V, VGS=--10V, ID=-2A VDS=--30V, VGS=--10V, ID=-2A IS=--2A, VGS=0V Ratings min typ 15 2.1 2.7 --0.82 --1.2 max Unit nC nC nC V Package Dimensions unit : mm 7011A-001 Top View 0.25 Electrical Connection 8 7 6 5 2.9 0.15 8 5 0 to 0.02 1 : Source1 2 : Gate1 3 : Source2 4 : Gate2 5 : Drain2 6 : Drain2 7 : Drain1 8 : Drain1 1 2 3 4 2.8 2.3 0.25 1 0.65 4 0.3 Top view 0.9 1 : Source1 2 : Gate1 3 : Source2 4 : Gate2 5 : Drain2 6 : Drain2 7 : Drain1 8 : Drain1 Bottom View 0.07 SANYO : ECH8 Switching Time Test Circuit VIN 0V --10V VIN VDD= --30V ID= --1A RL=30 VOUT D PW=10s D.C.1% G ECH8615 P.G 50 S No. A0301-2/4 ECH8615 --5. 0V 0V -4.0 V --3 .0V --2.0 ID -- VDS --10. 0V --4 ID -- VGS VDS= --10V Drain Current, ID -- A Drain Current, ID -- A --15 .0 V --6 . --1.5 --3 --1.0 --2 VGS= --2.5V Ta= 75 C 0 --0.5 --1.0 --1.5 --2.0 --0.5 --1 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 0 --2.5 --3.0 --3.5 IT10645 Drain-to-Source Voltage, VDS -- V 450 IT10644 450 RDS(on) -- VGS Gate-to-Source Voltage, VGS -- V RDS(on) -- Ta Ta=25C Static Drain-to-Source On-State Resistance, RDS(on) -- m Static Drain-to-Source On-State Resistance, RDS(on) -- m 400 350 300 250 200 150 100 50 0 0 --2 --4 --6 --8 --10 --12 --14 --16 400 350 300 250 200 150 100 50 0 --60 --1A ID= --0.5A 4V = -V GS , 0V 5A --0. = --1 VGS I D= A, --1.0 I D= --40 --20 0 20 40 60 80 100 25 --25 C C 120 140 160 Gate-to-Source Voltage, VGS -- V 10 yfs -- ID IT10646 7 5 3 2 Ambient Temperature, Ta -- C IT10647 IS -- VSD VGS=0V Forward Transfer Admittance, yfs -- S 7 5 VDS= --10V 2 Ta= 75 C 7 5 3 2 --0.01 7 5 3 2 --0.4 --0.6 --0.8 --1.0 --1.2 IT10649 0.1 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --0.001 --0.2 Drain Current, ID -- A 1000 7 5 IT10648 2 SW Time -- ID Ciss, Coss, Crss -- VDS f=1MHz Ciss Diode Forward Voltage, VSD -- V VDD= --30V VGS= --10V Switching Time, SW Time -- ns 100 7 5 3 2 td(off) Ciss, Coss, Crss -- pF 3 2 1000 7 5 3 2 tf td(on) 10 7 5 3 2 1.0 --0.01 2 3 5 7 --0.1 100 7 5 3 2 tr 2 3 5 7 --1.0 2 3 57 IT10650 0 --5 --10 25 1.0 Coss Crss --15 --25 --20 = Ta --0.1 7 5 3 2 C C --2 5 C C 75 C 25 Source Current, IS -- A 3 --1.0 7 5 3 2 --25 --30 IT10651 Drain Current, ID -- A Drain-to-Source Voltage, VDS -- V No. A0301-3/4 ECH8615 --10 --9 VGS -- Qg VDS= --30V ID= --2A Drain Current, ID -- A 5 3 2 --10 7 5 3 2 --1.0 7 5 3 2 --0.1 7 5 3 2 ASO IDP= --20A 10s Gate-to-Source Voltage, VGS -- V --8 --7 --6 --5 --4 --3 --2 --1 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 IT10652 10 1m ID= --2A 10 0 s s DC op 10 ms era 0m s 25 C tio n( Operation in this area is limited by RDS(on). Ta = ) --0.01 --0.1 Ta=25C Single pulse Mounted on a ceramic board (900mm2!0.8mm) 2 3 5 7 --1.0 2 3 5 7 --10 2 3 Total Gate Charge, Qg -- nC 1.8 PD -- Ta Mounted on a ceramic board (900mm2!0.8mm) Drain-to-Source Voltage, VDS -- V 5 7 --100 IT10653 Allowable Power Dissipation, PD -- W 1.6 1.5 1.4 1.3 1.2 1.0 0.8 0.6 0.4 0.2 0 0 20 40 To t al di ss 1u ip nit ati on 60 80 100 120 140 160 Ambient Temperature, Ta -- C IT10654 Note on usage : Since the ECH8615 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Specifications of any and all SANYO Semiconductor products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor products (including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO Semiconductor believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of January, 2006. Specifications and information herein are subject to change without notice. PS No. A0301-4/4 |
Price & Availability of ECH8615
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |